Parking sensors with video control
Article number: 06921
Product class: Parking Sensor
Description:
By connecting the kit 6/921 to any screen available on the car, you can visibly locate possible OBSTACLES, by means of colored areas determining the car-distance.
At the same time, the kit 6/921 will also recognize the REAR-CAMERA-SIGNAL (when car is fitted with a rear-camera) and consequently DIVIDES THE SCREEN in two parts:
- On the LEFT, you will see the rear-camera picture.
- On the RIGHT, you will see the sketched car (as per attached 6/921 Data-sheet).
The parking-kit 6/921 comes complete with:
- Central Box, with Video-exits and Input for the rear-camera-signal.
- 4 PHONOCAR-sensors (we are using also in combination of all current parking-kits)
- A series of Adapters, flush-mount-adapters included.
When connecting the central-unit to the rear-camera-input of a Multimedia-device, the monitor will show only the active parking-symbol.
On the other hand, when there is an installed rear-camera, you can visualize both: rear-camera-picture and active parking-symbol.

With sensors and rear camera
Only with sensors
INSTALLATION FROM INSIDE OR OUTSIDE THE BUMPER.
For Rear-Bumper
Control box unit 108x78x32 mm.
Power 10 ÷ 25 V
Automatic de-activation -
Sensor dimensions Ø 18x17 mm.
Adjustable depth 17 mm.
Installation hole Ø 18 / 22 mm.
Operating Temperature - 20 +70 °C
Sensor cable length 2,5 m.
Buzzer cable length 3 m.
Flat supports for installation from outside the bumper. 4
Inclined supports for installation from outside the bumper. 4
Flat supports for installation from inside the bumper. 4
Inclined supports for installation from inside the bumper. 4